Red Headlight Film With Air Channel Paper Liner
There’s something completely unique and remarkable about the color red. It commands attention, carries weight, and never plays it safe. That same bold energy comes to life in this Red Headlight Film with Air Channel Paper Liner by Vinyl Frog. It is more than just a color shift; it’s a transformation in the whole attitude and the overall appearance of your ride, making it more aggressive and attention-grabbing. It’s the look embraced by confident drivers who treat the road like their stage. From the moment the headlight film is applied, the entire front end of your car takes on a more daring tone with this deep, strong tint.
Our Red Headlight Tint is a durable film that is thin and flexible. It easily takes on the shape of your car’s headlight, no matter how complex it is. You do not have to prepare soapy water for its application. It is applied dry. Simply remove the liner and place the film on the surface of your headlight using a squeegee to smooth it out. The integrated channels in its solvent-based, acrylic adhesive allow air to escape as you apply it, helping you avoid bubbles, folds, or frustration. You just have to cut, install, and swipe with the squeegee towards the edges, and you will get a flawless finish in no time. It’s as simple as that.
Once applied, this amazing Red Tint clings tightly to the lens. You will get no edge lift, no peeling, and certainly no regrets. And while the look screams motorsport, the performance quietly works behind the scenes to shield your lights from road debris, sun exposure, and minor abrasions. When it comes to maintenance, simplicity rules. Our Red Headlight Film is easy to wipe clean, rain beads off effortlessly, and it holds up well under pressure. It also resists cracking, yellowing, and fading, so your look stays fresh for a long time. Add it to the cart now and give your car that pulse of color that sets it apart.
Features And Specifications
- Color: Red.
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Application Method: Dry.
- Lifetime: 1 year (Based on vertical exposure).
- Type: Automotive, architectural, marketing applications, indoor & outdoor.
- Durable, long-lasting, and high-performance.
- Eco-friendly, high-grade tint.
- Water and weatherproof.
- Heat, UV, and scratch-resistant.
- Easy to apply and maintain.
- Equipped with a top protective film.
- Features heat-activated self-healing technology.
- Acrylic-based, repositionable ultra-clear adhesive.
- Easy to reposition and slide.
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
There’s something completely unique and remarkable about the color red. It commands attention, carries weight, and never plays it safe. That same bold energy comes to life in this Red Headlight Film with Air Channel Paper Liner by Vinyl Frog. It is more than just a color shift; it’s a transformation in the whole attitude and the overall appearance of your ride, making it more aggressive and attention-grabbing. It’s the look embraced by confident drivers who treat the road like their stage. From the moment the headlight film is applied, the entire front end of your car takes on a more daring tone with this deep, strong tint.
Our Red Headlight Tint is a durable film that is thin and flexible. It easily takes on the shape of your car’s headlight, no matter how complex it is. You do not have to prepare soapy water for its application. It is applied dry. Simply remove the liner and place the film on the surface of your headlight using a squeegee to smooth it out. The integrated channels in its solvent-based, acrylic adhesive allow air to escape as you apply it, helping you avoid bubbles, folds, or frustration. You just have to cut, install, and swipe with the squeegee towards the edges, and you will get a flawless finish in no time. It’s as simple as that.
Once applied, this amazing Red Tint clings tightly to the lens. You will get no edge lift, no peeling, and certainly no regrets. And while the look screams motorsport, the performance quietly works behind the scenes to shield your lights from road debris, sun exposure, and minor abrasions. When it comes to maintenance, simplicity rules. Our Red Headlight Film is easy to wipe clean, rain beads off effortlessly, and it holds up well under pressure. It also resists cracking, yellowing, and fading, so your look stays fresh for a long time. Add it to the cart now and give your car that pulse of color that sets it apart.
Features And Specifications
- Color: Red.
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Application Method: Dry.
- Lifetime: 1 year (Based on vertical exposure).
- Type: Automotive, architectural, marketing applications, indoor & outdoor.
- Durable, long-lasting, and high-performance.
- Eco-friendly, high-grade tint.
- Water and weatherproof.
- Heat, UV, and scratch-resistant.
- Easy to apply and maintain.
- Equipped with a top protective film.
- Features heat-activated self-healing technology.
- Acrylic-based, repositionable ultra-clear adhesive.
- Easy to reposition and slide.
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
Original: $6.00
-70%$6.00
$1.80Description
There’s something completely unique and remarkable about the color red. It commands attention, carries weight, and never plays it safe. That same bold energy comes to life in this Red Headlight Film with Air Channel Paper Liner by Vinyl Frog. It is more than just a color shift; it’s a transformation in the whole attitude and the overall appearance of your ride, making it more aggressive and attention-grabbing. It’s the look embraced by confident drivers who treat the road like their stage. From the moment the headlight film is applied, the entire front end of your car takes on a more daring tone with this deep, strong tint.
Our Red Headlight Tint is a durable film that is thin and flexible. It easily takes on the shape of your car’s headlight, no matter how complex it is. You do not have to prepare soapy water for its application. It is applied dry. Simply remove the liner and place the film on the surface of your headlight using a squeegee to smooth it out. The integrated channels in its solvent-based, acrylic adhesive allow air to escape as you apply it, helping you avoid bubbles, folds, or frustration. You just have to cut, install, and swipe with the squeegee towards the edges, and you will get a flawless finish in no time. It’s as simple as that.
Once applied, this amazing Red Tint clings tightly to the lens. You will get no edge lift, no peeling, and certainly no regrets. And while the look screams motorsport, the performance quietly works behind the scenes to shield your lights from road debris, sun exposure, and minor abrasions. When it comes to maintenance, simplicity rules. Our Red Headlight Film is easy to wipe clean, rain beads off effortlessly, and it holds up well under pressure. It also resists cracking, yellowing, and fading, so your look stays fresh for a long time. Add it to the cart now and give your car that pulse of color that sets it apart.
Features And Specifications
- Color: Red.
- Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
- Packaging: Roll.
- Application Method: Dry.
- Lifetime: 1 year (Based on vertical exposure).
- Type: Automotive, architectural, marketing applications, indoor & outdoor.
- Durable, long-lasting, and high-performance.
- Eco-friendly, high-grade tint.
- Water and weatherproof.
- Heat, UV, and scratch-resistant.
- Easy to apply and maintain.
- Equipped with a top protective film.
- Features heat-activated self-healing technology.
- Acrylic-based, repositionable ultra-clear adhesive.
- Easy to reposition and slide.
Please Note: This light tint film is semi-transparent. The color may look slightly different on the white backing paper, but once the backing is removed and applied to your lights, you’ll see the true color.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Video
Physical Properties
Physical Performance
Shelf Life
1 year from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
Application method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves and overlaps.
Aftercare: PH neutral. Avoid wax or solvents.
