🎉 Up to 70% Off Selected ItemsShop Sale
1 / 6
+1
3 in 1 Headlight Film Kit (40cm) with Air Channel Paper Liner
Key Features
- Air Channel for Easy Installation: Integrated air channels allow for bubble-free installation.
- Anti-Scratch Top Protected Film: Top film layer protects against scratches and keeps the surface smooth.
- Dry Application: No water needed; easily applied with a dry method.
- Repositionable: Allows for multiple adjustments during installation.
- High Clarity: Ensures high transparency for clear visibility.
Structure
- Gloss Finish (4 layers): Top Protected Film, Polymeric Face Film, Acrylic Adhesive, Release Liner.
- Satin Finish (3 layers): Polymeric Face Film, Acrylic Adhesive, Release Liner.
Specifications
Size: 32ft/975cm(L) x 1.3ft/40cm (W) each.
Set of 3 Colors: Light Black, Deep Black, Satin Black
Durability: 1 year
Recommendations
- Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
- Application Method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
- Post-heating Temperature: 110°C flat surfaces, 130°C curves and overlaps.
- Aftercare: PH neutral. Avoid wax or solvents.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
Key Features
- Air Channel for Easy Installation: Integrated air channels allow for bubble-free installation.
- Anti-Scratch Top Protected Film: Top film layer protects against scratches and keeps the surface smooth.
- Dry Application: No water needed; easily applied with a dry method.
- Repositionable: Allows for multiple adjustments during installation.
- High Clarity: Ensures high transparency for clear visibility.
Structure
- Gloss Finish (4 layers): Top Protected Film, Polymeric Face Film, Acrylic Adhesive, Release Liner.
- Satin Finish (3 layers): Polymeric Face Film, Acrylic Adhesive, Release Liner.
Specifications
Size: 32ft/975cm(L) x 1.3ft/40cm (W) each.
Set of 3 Colors: Light Black, Deep Black, Satin Black
Durability: 1 year
Recommendations
- Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
- Application Method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
- Post-heating Temperature: 110°C flat surfaces, 130°C curves and overlaps.
- Aftercare: PH neutral. Avoid wax or solvents.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
$68.10
Original: $227.00
-70%3 in 1 Headlight Film Kit (40cm) with Air Channel Paper Liner—
$227.00
$68.10Description
Key Features
- Air Channel for Easy Installation: Integrated air channels allow for bubble-free installation.
- Anti-Scratch Top Protected Film: Top film layer protects against scratches and keeps the surface smooth.
- Dry Application: No water needed; easily applied with a dry method.
- Repositionable: Allows for multiple adjustments during installation.
- High Clarity: Ensures high transparency for clear visibility.
Structure
- Gloss Finish (4 layers): Top Protected Film, Polymeric Face Film, Acrylic Adhesive, Release Liner.
- Satin Finish (3 layers): Polymeric Face Film, Acrylic Adhesive, Release Liner.
Specifications
Size: 32ft/975cm(L) x 1.3ft/40cm (W) each.
Set of 3 Colors: Light Black, Deep Black, Satin Black
Durability: 1 year
Recommendations
- Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, sprayer, towel, and installation liquid
- Application Method: Standard methods for Car Light Protection Film. Do not overstretch and overheat. Post heating is necessary.
- Post-heating Temperature: 110°C flat surfaces, 130°C curves and overlaps.
- Aftercare: PH neutral. Avoid wax or solvents.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Physical Performance
Important Notice
The physical properties of the product detailed in this document are based on tests that we believe to be reliable. They are intended only as a source of information and are given without guarantee. They do not constitute a warranty. Purchasers should independently assess the suitability of this material for their specific use prior to application.
Warranty, Limited Remedy, and Disclaimer
Unless an additional warranty is specifically stated on the applicable product packaging or literature, VinylFrog warrants that each product meets the applicable specifications at the time of shipment. We make no other warranties or conditions, express or implied, including but not limited to any implied warranty or condition of merchantability or fitness for a particular purpose, or any implied warranty or condition arising out of a course of dealing, custom, or usage of trade. If the VinylFrog product does not conform to this warranty, then based on our discretion, the sole and exclusive remedy is either the replacement of the product or a refund of the purchase price.
Limitation of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from its product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Durability
The durability of the product is based on exposure conditions in South China. Actual performance life will depend on substrate preparation, exposure conditions, and maintenance of the product. For instance, in areas with excessively high temperature, industrial pollution, or high altitude, exterior performance will decrease.
